Tested and approved tile adhesives for bonding ceramic tiles to WET-SEAL™ ENVIRO-COAT DS 411 and ENVIRO-COAT IS 511 Waterproofing membrane systems.
Download HereInstallation of Tiles to Concrete Shower Bases
Adhesive fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) up to and larger than 400 x 400mm in size, to topping screeds on concrete floors forming the base of internal showers with minimal fall of 1:100.
Download HereInstallation of Tiles to External Timber Balcony Floors
Adhesive fixing of ceramic and/or porcelain tiles up to and larger than 400 x 400mm in size, (excluding moisture sensitive natural stone) to external balconies constructed from waterproofed marine grade plywood.
Download HereInstallation of Tiles to Internal Timber Floors Covered with Sheet Underlay
Adhesive fixing of ceramic and porcelain tiles (excluding moisture sensitive natural stone) up to and larger than 400 x 400mm in size, to internal prepared timber floors covered with fibre cement (f.c.) sheet ceramic tile underlay. Suitable floors for covering with the f.c. sheet underlay include T&G strip timber, structural particleboard and plywood.
Download HereInstallation of Tiles to Internal Sheet Timber Floor Substrates
Adhesive fixing of ceramic and porcelain tiles (excluding moisture sensitive natural stone) larger than 400 x 400mm in size; to internal sheet timber floors constructed from structural plywood and particleboard.
Download HereInstallation of Large Format Tiles to Concrete Floor Slab
Adhesive fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) larger than 400 x 400mm in size, to prepared concrete floors internally & externally.
Download HereInstallation of Tiles to Timber Shower Bases with Mortar Toppings
Adhesive-fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) of all sizes, to topping screeds on sheet timber (plywood or particleboard) floor substrates forming the base of internal showers with minimal fall of 1:100
Download HereInstallation of Tiles to External Balconies with Mortar Topping Screed
Adhesive fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) up to and larger than 400 x 400mm in size, to external balconies constructed from marine grade plywood with a waterproofed screed.
Download HereInstallation of Tiles to Internal Sheet Timber Floor Substrates
Adhesive fixing of ceramic and porcelain tiles floors (excluding moisture sensitive natural stone) up to 400 x 400mm in size, to internal prepared sheet timber. Sheet timber refers to plywood and particleboard only.
Download HereInstallation of Tiles to Concrete Floor Slab
Adhesive-fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) up to 400 x 400mm in size, to prepared concrete floors, internally & externally.
Download HereInstallation of Tiles to Internal Plasterboard Walls
Adhesive fixing of ceramic and/or porcelain tiles (excluding moisture sensitive natural stone) in all sizes onto internal plasterboard walls surfaces including water resistant (WR grade) sheets and surfaces that have been coated with an applied waterproofing membrane. This installation is subject to the load carrying capacity of the wall substrates and, as a guide, tile finishes in excess of 32k/m2 and/or higher than 3m up the wall, shall include additional mechanical support systems to limit possible cohesive failure of the sheet wall substrate due to the weight of the tiles.
Download Here